Click Speed Test (CPS and Peak Burst)
Check your mouse or touch screen input rate over a 5-second or 10-second timer, with one count recorded per press to calculate your overall CPS and peak burst rate.
Ready
How it works
This tool measures how fast you can trigger individual press events inside the target area during a fixed time window. You can choose a 5-second or 10-second duration. The timer begins on your very first press inside the test pad, so there is no countdown delay before you start. Every physical mouse click or screen tap registers as exactly one count upon press-down. While the timer runs, the tool tracks both your cumulative count to find your overall clicks per second (CPS) and your shortest intervals to calculate your peak burst rate.
Steps
First, select either the 5-second or 10-second timer option to set your run length. Second, click or tap inside the test pad to start the clock and continue pressing as rapidly as you can until the timer reaches zero. Third, check your total press count, average CPS, and peak burst readout, then press the reset button when you are ready for another trial.
Controls
The duration selector switches the active test window between 5 and 10 seconds. Total clicks shows the raw number of individual press events recorded before time expired. CPS (clicks per second) is your total press count divided by the selected duration. Peak burst shows the highest short-term press rate you reached during the fastest portion of that run.
Examples
If you select the 5-second mode and register 35 presses, your overall score is 7.0 CPS, and your peak burst might read 8.5 CPS from your fastest opening second. If you switch to the 10-second mode and record 64 presses, your overall average is 6.4 CPS, while a peak burst of 8.0 CPS shows your initial pace before finger fatigue slowed your rhythm. A run where average CPS and peak burst are nearly identical indicates a steady, even cadence throughout the timer.
How to read your result
Your results reflect the combined speed of your finger movement, your clicking technique, and how your hardware and browser process input events. Comparing your 5-second and 10-second scores helps show how much stamina affects your pace. Comparing Peak Burst to average CPS shows whether you start fast and slow down or hold a steady rhythm. These numbers are purely an informal check of input rate and hardware response, not a medical, neurological, or clinical evaluation.
Reference ranges
These rough comparison bands are informal reference ranges from casual browser testing, not a medical, psychological, or clinical scale. With standard single-finger clicking or tapping, many people land around 4 to 7 CPS over a 5-second or 10-second run. Users who practice rapid clicking for games often reach around 7 to 10 CPS. Scores above 10 CPS usually involve specialized clicking techniques, specific mouse switch characteristics, or multi-finger tapping on a touch screen. Ten-second averages often run slightly lower than five-second averages due to normal muscle fatigue.
Tips
On a desktop or laptop, rest your wrist comfortably on the desk and keep the mouse stationary so cursor movement does not interrupt your clicking rhythm. Use a wired mouse or a fresh wireless battery, and close heavy background tabs that might cause browser frame drops. On a phone or tablet, place the device flat on a stable surface or table rather than holding it in one hand, so the screen does not bounce away from your tapping finger.
FAQ
What does this click speed test measure and not claim?
This tool counts browser press events inside the test box over a 5-second or 10-second window to calculate your average clicks per second (CPS) and peak burst speed. Each press-down registers one count. It does not measure hardware switch latency directly, and it makes no claims about your health, reflexes, or motor function.
Why do two runs on the same device give different scores?
Small changes in finger posture, muscle fatigue between runs, and how cleanly you release the mouse button or lift your finger off the glass will change your count. Switching between the 5-second and 10-second modes also changes the result, since holding your peak burst pace is harder over ten seconds.
How do I run this test on a phone or tablet?
Open the page in your mobile browser, choose the 5-second or 10-second duration, and tap directly inside the test area. The tool treats each touch press the same as a mouse click, adding one count per tap and calculating your overall CPS and peak burst when the timer ends.
Where are my test results and high scores stored?
All calculations happen locally inside your browser on this device. Your run results are never collected, transmitted, or uploaded to any server. If the tool saves your personal high scores between visits, that data stays strictly in your browser local storage on this device.
What do a high result and a low result mean here?
A higher CPS or peak burst simply means more press events were registered during the 5 or 10 second timer, often due to practiced clicking technique or light hardware switches. A lower number usually reflects a relaxed pace, stiff buttons, or trackpad delay. Neither score is a health or psychological diagnosis.
Privacy
This page runs entirely in your browser on this device; your test results are never collected or uploaded, though personal high scores may be saved in local storage on this device.